Home > GoControl > Smart Lighting & Appliance Control >

GoControl Z-Wave Plug-in Dimmer Module
GoControl Z-Wave Plug-in Dimmer Module
 
Price: $54.95


Product Code: PD300Z-2
Qty:

Description
 
GoControl Z-Wave Plug-in Dimmer Module

The Plug-in Lamp Module is designed to provide Z-Wave control to a connected dimmable lamp. The PD300Z-2 module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module. Once connected, the lamp can be dimmed or turned on/off remotely via the Z-Wave controller. The module contains two power receptacles - one controlled and one pass-through (powered at all times).

This Plug-in Lamp Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

AUTO-SENSE
Unique to Nortek Security & Control, the Auto-Sense feature allows for locallamp activation independent of the Z-Wave controller status. With AutoSense, one can simply switch the connected lamp's manual switch off, then on, and AutoSense will instruct the PD300Z-2 to turn the lamp on.

Specifications:
  • Signal (Frequency): 908.42 MHz
  • Incandescent: 300W maximum, 120 VAC
  • Range: Up to 100 feet line of sight between the wireless controller and/or the closet Z-Wave device
  • Network wide inclusion
  • One controlled and one pass-through outlet
  • Security beaming
  • 120 VAC, 60 Hz Power Requirement

Share your knowledge of this product. Be the first to write a review »