Home > Qolsys > Accessories >

Qolsys QS7134-840 IQ Hardwire 16-F (Large Enclosure) Hardwired to Wireless Alarm Translator
Qolsys IQ 16-Zone Hardwired to Wireless Alarm Translator (QS7121-840)
Qolsys IQ 16-Zone Hardwired to Wireless Alarm Translator (QS7121-840)
  
Alternative Views:
Price: $175.00
Clearance Sale $162.75
Savings: $12.25

Quantity in Stock:Notify Me When Back in Stock

Product Code: QS7134-840
Qty:

Description
 
Qolsys QS7134-840 IQ Hardwire 16-F (Large Enclosure)
Hardwired to Wireless Alarm Translator
The IQ Hardwire 16-F (Large Enclosure) offers a cost effective way of integrating hardwired security & smoke detector zones with the IQ Panel 2. It includes a large enclosure with ample wire routing room, backup battery charging, 500mA of 12volt auxiliary power, an onboard siren relay, built-in status LED’s for each zone and support for up to 10 two-wire smoke detectors. Normally Open and Normally Closed contacts are supported as well as powered zones like motion sensors and glass break detectors.

Features:

  • Large plastic enclosure with ample wiring room, backup battery holder, and an expansion slot for second module
  • Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
  • Supports up to ten two wire smoke detectors
  • LED lighted zones for ease of “learn-in” installation/troubleshooting
  • EOL supervision using 4.7K Ohm resistors (included) or 1k-10k Ohm depending on Resistor Mode
  • Up to 500 Milliamps of power for hardwired motion detectors, glass break detector, and/or sirens
  • Charging circuit for back-up battery, fully supervised with power outage recovery

Specifications:
  • Input Voltage: 16.0VDC Plug-In Transformer
  • Backup Battery: 12VDC 5AH Max (not included)
  • Dimensions: 16” X 14" X 3”
  • Operating Temperature: 32 to 122F (0 to 50C)
  • Humidity: 95% RH Max
  • EOL Supervision: 4.7k Ohm fixed or 1k-10k Ohm depending on Resistor Mode
  • Input Zones: 15 N/O or N/C
  • Smoke Zone: 1 two-wire smoke loop, 10 detectors max. Support for System Sensor® 2W-B, 2WT-B, 2WTA-B*
  • Auxiliary Voltage Output: 12VDC @ 500mA Max
  • Tamper Zone: Used for case tamper, no resistor
  • Relay Contact: 60VDC/1A Max drives siren

*Detector models should not be mixed

Share your knowledge of this product. Be the first to write a review »